Dss-networks C5468 Manuel d'utilisateur télécharger pdf (Page 22)

GigMAC-CPCI-3U Network Interface Cards

Gig-CPCI-3U Gigabit Ethernet Switches Board and Driver Users Manual

DSS NETWORKS, INC. DocVersion: 1.2 Page: 22

TYPE=Ethernet

USERCTL=no

NETMASK=255.255.255.0

NETWORK=192.168.0.0

BROADCAST=192.168.0.255

Note: You should also add a line to /etc/modules.conf for each interface as shown in the

following example:

SAMPLE MODULES.CONF FILE

alias eth1 dpm

alias eth2 dpm

alias eth3 dpm

alias eth4 dpm

options dpm ChipSelector=1 IntrHoldOff=0

Note: In order to load the Intel driver, the "ChipSelector=1" option (the default) can be

set in the 'options' field of modules.conf. Please see man page for modules.conf for

additional information on module configuration.

MANUAL DRIVER INSTALLATION

insmod ./dpm.o # to insert driver module

ifconfig eth1 192.168.0.3 # if not already configured by system

Once driver is inserted you may need to run "ifconfig" command or it may be run

automatically by the system.

MANUAL DRIVER REMOVAL

ifdown eth[n] # repeat for all 'dpm' network interfaces

rmmod dpm # to remove driver module

LOADING THE DRIVER FOR INTEL BASED MODELS (C5261, C5262, C5164, etc.)

Note: In order to load the Intel driver, the "ChipSelector=1" option is not required during

the 'insmod' as it is the default option:

insmod ./dpm.o [ChipSelector=1]

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 45 46

Pas de commentaire

Dss-networks C5468 Manuel d'utilisateur Page 22